Flashing with odin. How to use Odin for Samsung

Users of Samsung smartphones based on the Android operating system often face a problem when the phone starts to “fail” and freeze. Such problems usually arise due to the installation of unlicensed and third-party software that helps to "kill" the system. In some cases, a smartphone takes on a life of its own due to viruses that can enter the device from third-party media (flash cards and computers) and when connected to the Internet.

The best solution to the situation would be a flashing of the smartphone. But official service centers most often refuse warranty service (and have every right to do so), while exposing a requirement to pay for the work. Since the service is not cheap, many users can try to bring the smartphone back to life on their own. This article will provide information about how, through Odin - the most popular official firmware update program.

Beginning of work

The first step to success in a difficult business is to prepare for the process. You need to make sure that the smartphone battery is at least 80 percent charged (it is better if the battery is full). Also, in order to understand how to flash through Odin, you need to download the program itself to your personal computer. In this case, the operating system installed on the PC must be at least Windows XP.

You will definitely need the firmware itself (it can be single-file or multi-file), and ADB drivers, which can be downloaded from specialized sites. As soon as it becomes clear that all conditions are met, the process can begin.

Driver installation

One of the key things to do before flashing through Odin is installing the necessary drivers for your smartphone. All you need to do is download the installer file and run it (preferably as an administrator).

There are times when the drivers are already installed on the PC. To make sure everything goes as it should, it's worth checking the system for old versions. If you find outdated drivers, uninstall them and install the newest ones.

Loading the smartphone into Downloading mode

How to flash Samsung via Odin? Easily! The first thing to do directly with the smartphone is to start it in Downloading mode. But before that, you should make sure that all the necessary information from the smartphone was saved before the firmware, since after it the device will turn on “like new” and there will be no information on it.

If the device does not turn on, do not despair. On the gadget turned off, you need to hold down the "Volume -", "Home" and "On / Off" buttons together. As soon as the screen asks you to confirm the action, you need to press the "Volume +" button. After that, an image of an android robot and the inscription Downloading will appear on the screen. We connect the smartphone via a USB cable to the PC, and on this the necessary actions with the smartphone are completed.

First launch of Odin

So the moment of the firmware process has come. This should be approached with great responsibility and once again re-read the entire instruction. If something goes wrong, you can get the so-called "brick", and the restoration of the smartphone will cost a lot of money or become completely impossible.

Therefore, before flashing through Odin, you need to deal with the program itself. To do this, first unzip the archive directly from Odin to any convenient location on your hard drive, and then run the Odin.exe file. So, in the interface menu you can see a lot of obscure buttons and words. But don't be afraid of it. In order to learn how to flash through Odin, you only need to know what firmware is available.

How to flash Android using Odin

If the firmware consists of only one file, all you need to do is click on the PDA button and select the location of that firmware file in the window that opens.

Otherwise, having a firmware of three files, you should select the largest file in the PDA line (it contains the word CODE), in the PHONE line - the file containing the word PHONE in the name, in the CSC line - respectively, the file with the CSC keyword.

After these manipulations, you should make sure that there are checkmarks opposite the Auto Reboot and F. Reset Time labels. It must be remembered that in no case should there be a check mark opposite the words Re-Partition, since this can turn the device into a “brick”!

Other lines and checkboxes are needed for more advanced users and those who develop so-called custom firmware versions for smartphones, so the best solution is not to experiment with the above functions. Next, you need to click on the Start button, and the firmware process will begin directly.

During firmware

During the firmware process, you need to make sure that the PC does not turn off or freeze for no reason, as this can lead to disastrous consequences for the smartphone. Also, do not disconnect the USB cable and press any buttons.

Just? It turns out that yes. Indeed, in order to understand how to flash a Samsung smartphone through Odin, no special skills and knowledge are required. The most important thing is to make sure that the firmware process has reached its final stage, and the loading bar has passed 100%. After that, the smartphone will reboot on its own and turn on in setup mode, as if it had been unpacked and launched for the first time.

With the correct step-by-step setup, the phone will boot in normal mode and begin to function freely. The entire file system will be updated, there will be no data left from the previous firmware. Therefore, once again, you should pay attention to the paragraph that says about saving files on any convenient medium before the firmware process.

In general, I want to say that almost everyone can cope with the task. But if there is no confidence in the skills of working with a PC and a smartphone, then it is better not to take risks. In such cases, it is often much more profitable to turn to specialists and get a 100% positive result. Therefore, before flashing a Samsung smartphone on Android through Odin, it is worth deciding whether there is a willingness to experiment with such manipulations.

The most important thing is to be confident in yourself and your abilities, and the rest should be left to complex computing processes performed by a personal computer, operating system and software.

Due to the presence of a wide list of auxiliary software, the firmware of a mobile phone or tablet becomes available to ordinary users. If you are going to install a new OS on your Samsung phone, then be sure to read the instructions for using the Odin program. What kind of software is this, how to use it and where to download it, will be described later.

What is Odin and where to download it

Odin is a specialized utility with which the firmware of most smartphones and tablets from Samsung is carried out. This is an official development created by programmers and engineers from Samsung, so its operation is completely safe, provided the correct actions are taken. There are 3 stable versions:

1.85 (for gadgets released before 2011);
3.07 (for models from 2011 to 2014);
3.10.6 (for devices 2014-2016).

For modern smartphones, you can download the latest version. Please note that the software is provided in English. You can find Russified "One" on the net, but its use is not recommended. It is possible to turn the gadget into a "brick", so do not use modified versions from the developer.

You can download the utility from various forums and specialized sites. This resource provides a list of all versions for download. The program is included in a zip file, so you will need an archiver on your computer to extract the installer. Remember that the software is only compatible with Samsung mobile gadgets on the Android operating system.

Types of firmware and where to download them for Samsung

Firmware for the phone is conditionally divided into 2 groups: single-file and multi-file. As the name implies, the former includes everything you need in a single file. The latter with many components are practically never found, while they can only be used in service centers. The extension of such files is .tar or tar.md5.

There are also official and custom ones. The latter are modified operating systems with added features or design changes. They may come with root rights. If you only need to return the gadget to working condition, use the official versions. Custom ones are suitable for advanced users.

You can download the axis on the Samsung support website or from Find Firmware, Samsung Updates resources. Be sure to find out the full model of the smartphone in order to avoid the situation of installing an incompatible version.

Important rules for smartphone firmware

Before starting the procedure, there are a number of important steps that must be taken. First you need to install a USB driver on your computer / laptop. You can download it from various forums. An alternative option is to install the Kies program on your PC. This is the official software from the developers, which will automatically install all the necessary drivers.

If you don't have it, then you need to do the following:

After installing the drivers through Kies, the software must be completely disabled. Be sure to check through the "Task Manager" that the process is deleted. Next, it is recommended to backup the EFS folder to avoid losing IMEI. For additional insurance, write down the combination itself, so that if it is lost, it can be restored.

Install Odin on your computer. The phone must be fully charged before starting the procedure. You will need a USB to microUSB cable to connect. It is advisable to use only the original. We recommend flashing through a charged laptop or computer with an uninterruptible power supply. A power outage during the procedure can end extremely sadly. Also, the files must be located on a path that does not contain Russian letters. We recommend placing them directly on drive C or D.

If the smartphone is in working order, back up all important data: contacts, photos, videos, documents, and more.

Firmware step by step instructions

Let's move on to the most difficult - flashing. The whole process is to add the appropriate files to Odin, but there may be "pitfalls", which we will discuss later.

Putting your phone into download mode

A mandatory item is the transfer of the smartphone to a special mode. Factory mode is a system menu through which the software update process is launched. Activation of this mode in modern smartphones is carried out by pressing and simultaneously holding three buttons: “home”, volume down and turning on the device (the mobile device must be turned off). On some older models, it is enough to hold down only the "volume -" and "on".

You will see a warning. Agree to continue by selecting Continue through the volume buttons. A window with information about the enabled mode should appear.

Do not click other buttons or turn off the gadget.

Connecting to a PC and Installing Drivers

The second step is to connect the phone to the computer. Connect devices via USB. Be sure to use the USB 2.0 port on the back of the computer (directly from the motherboard). USB 3.0 specification ports work with a 50% chance. If the drivers were installed correctly, then a message will appear in the system tray that the device is ready for use.

If the driver is not installed, then install it as an administrator. The process is similar to installing any typical program: just click next. Launch One. If the device is recognized, you will see one of the COM ports active (highlighted in yellow/blue in the interface).

Installing firmware in Odin

All preparations have been completed. So, by the time of this stage you should have:

downloaded a file or several for firmware, saved on a computer in one directory;
connected "Samsung" via USB, while switched to Download Mode;
Odin software of the required version is installed;
all important files are backed up.

Only after that start the procedure. Uninstall Kies from your computer first (via the Programs and Features menu).

Single file firmware

This option is the easiest way, since you have to take a minimum of steps. The instruction consists of the following items:

Be sure to check the phone's performance and the smoothness of menu switching. Not always the update gives a performance boost.

Multi-file firmware

This method is actually the same as the one above, with the exception that you will have to add several files to the program. The procedure consists of the following steps:

run the software as an administrator and make sure that the phone is detected;
in the Options tab, leave the checkboxes as described in the previous section;
upload files to the appropriate fields by clicking the buttons, and then click Start.

The main difficulty is where to ship specific objects. The hint will lie in the names themselves. For example, if the object name contains BL, then it must be inserted into the BL field, and so on.

Button names in Odin may vary, so be sure to check out the following table:

Before pressing Start, check that all files are in their places. Wait for the inscription Pass and turn off the device.

Firmware with PIT file

Sometimes you need to repartition the memory. Odin allows you to do this, but only if you have a special PIT file. You can connect it during single-file and multi-file methods. The whole process boils down to the following steps:

Wait until the end, and then disconnect the gadget from USB. Turn on Re-Partition only if your gadget has a serious problem, when it does not boot, freezes on the screen with the model name, or memory errors are detected.

Separate software components: kernel, modem and recovery

If necessary, through this software, you can install individual components. In some situations, updating the kernel will significantly improve performance, run demanding applications and games. Upgrading your modem can fix Wi-Fi issues. The differences are only in the files that you will download. Kernel firmware, as a rule, has the word Kernel in the name.

Next, an example will be shown on how to install TWRP custom recovery via ODIN. This is a special system menu that has a wider and more intuitive interface. Follow the instruction:

Important! You add the kernel file to the AP (PDA) line, and when flashing the modem, you must use the CP (Phone) field. Those are the only differences.

Possible errors during the firmware and their elimination

The simplest problem is that the phone is not recognized by the program. Here you will need to install the latest version of the drivers. Sometimes the phone does not want to go into Download Mode. An alternative method is to use the ADB software. This is a special program for a computer that will help you go to the phone's system menu. To interact with the gadget, it must be connected via USB.

If the firmware passes with errors, but the phone still works without problems, try downloading a different version of Odin. Individual Samsung are flashed only under a certain "One". We advise you to study this issue in more detail on specialized forums.

If during the firmware "One" gave the message Fail, while the device does not show signs of life, then do not panic. Follow the following procedure:

Remove the battery from the device. Let lie down for up to 30 minutes.
Reinstall the battery. Enter the recovery menu (press the power button, volume up and home at the same time). If you successfully entered the menu, click on wipe data / factory reset, and then wait for the reboot.
If you cannot enter the recovery, activate the emergency mode. Hold down the power + volume down + home buttons (for some Samsung, these may be other combinations).
From the emergency menu, try using Odin to flash with a 5-file service firmware.

When these tips do not work, contact the service center. Restoring the gadget on your own will no longer work.

Now you know how to use Odin software and flash Samsung mobile smartphones. Do not reflash Samsung without special need, because the operation does not give 100% success. This method allows not only updating, but also downgrading, for example, from Android 4.4.2 to 4.2.2. This is true in cases where the system has automatically updated the OS, and the new version is unstable.

Complain about content

Send

Each smartphone user is not immune from failures in his work, and sometimes even from a complete failure of the system. Often, the only way out is the firmware of the mobile device. Among owners of Android phones, Odin is considered an indispensable tool for flashing a device. Using it is quite simple, but there are some nuances in the program settings.

Firmware is the cure for all diseases

A modern smartphone or tablet is a powerful computer carrying a multi-core processor, a graphics accelerator, gigabytes of RAM and solid-state memory, as well as a variety of peripheral devices. It works under the control of the operating system (in our case, Android), and individual subsystems: a radio module, a camera, biometric sensors, are also controlled by their own firmware.

Firmware is a specialized distribution kit that contains all the software components necessary for the full-fledged operation of the "gadget". Flashing a device means installing this distribution into the device's memory. And there are usually only two main reasons for firmware - updating to a new version or restoring a broken smartphone. After the firmware has been correctly carried out, we get the device in a new condition, as if from a store.

The main reasons for flashing - updating or restoring a broken smartphone

The flash memory of the smartphone, on which the firmware and firmware of the radio module is written, is designed for a limited number of write cycles. Therefore, you should not flash several times a day in search of the perfect firmware. When the Flash memory cannot be written, the device will have to be thrown out or disassembled into "organs".

Types of firmware

There are several types of firmware for Android smartphones or tablets:

OTA-firmware is loaded into the device "over the air", via cellular networks 3G or Wi-Fi. It contains updates to individual programs or a newer version of the Android operating system. When installed correctly, user data, accounts and installed applications are preserved. Such firmware is the easiest way to flash a smartphone, but also the most dangerous: often during this operation, the device becomes a “brick” - it does not respond to the keys, the sensor and does not display anything on the screen;
firmware in the form of a zip archive. It is intended for installation in the device through Recovery - a built-in "flash driver", which can be accessed by pressing a certain combination of buttons when turned on. The firmware rewrites the system partition - installed programs and accounts are deleted;
single-file firmware for the Odin program. Contains an operating system with pre-installed applications. As in the previous version, programs and user accounts are deleted;
The 5-file firmware consists of the operating system, utility firmware, and partition tables of the device's internal memory. Its installation deletes absolutely all user data from the phone's memory, including those that were on the "internal" memory card.

Forewarned is forearmed: preparing the phone for firmware

During the production process, the manufacturer may make changes to the design of the smartphone/tablet. Therefore, devices released at different times may differ in hardware, despite the same appearance, model name and operating system. Before flashing, you need to identify the hardware revision of your device as accurately as possible. In most cases, this can be done by checking the serial number of the smartphone on specialized forums. For example, the Samsung Galaxy Win (GT-85520) smartphone has two hardware revisions and they need different firmware.

We list the criteria for successful smartphone firmware:

firmware downloaded from the network corresponding to the hardware revision of your device;
smartphone drivers and the Odin program itself, downloaded from a trusted source, ideally from the official Samsung website;
battery charged to at least 90%;
reliable tested cable for connecting to a computer;
a computer that is as free as possible from background processes and programs, ideally containing only the operating system and the Odin program.

Preparing the operating system

So, the phone is charged to the maximum, a reliable thick USB cable is found, games are unloaded from the computer and a thousand tabs in the browser are closed. It remains to do the last preparatory steps before the firmware process itself:

Remember that a power surge in the network, a pulled out computer power cord or a power outage will lead to an emergency termination of the firmware, and the device will become inoperable - a “brick”. Therefore, connect a stationary computer through an uninterruptible power supply (UPS), and charge the battery at a laptop.

How to flash an Android device

Working with single-file and 5-file firmware differs slightly. The program has several buttons for selecting the appropriate firmware file:

BL - bootloader (loader) - load a file like APBOOT_xxxxx.tar.md5 (will be present only in 5-file firmware);
AP or PDA, depending on the version of Odin - the main firmware file CODE_xxxxx.tar.md5 (in the case of a single file, the only one);
CP or PHONE - phone radio module file MODEM_xxxxx.tar.md5;
CSC - file like CSC_xxxxx.tar.md5;
PIT - PIT file, comes with only service 5-file firmware. When you select it, the program opens additional settings for the breakdown of the internal memory of the device. The firmware with this file will delete ALL DATA on the device, and if it fails, with a probability of 99%, you will get a “brick”.

Installing a single-file factory firmware

Installing a 5-file service firmware

If the firmware writing is successful, the program will write PASS in the upper left corner of the window and reboot the smartphone.

Turn on the Re-Partition mode only in case of serious problems with the device: it does not boot, hangs on the splash screen, there are errors in the internal memory - files do not open or open with errors. Most of the devices that died during the firmware were flashed with a 5-file service firmware and troubles happened during the re-partitioning of the internal memory. Firmware for the kernel of the Android operating system and Recovery files

After that:

Press the AP or PDA button in the program window, select the * .img file in the window that opens.
Press the Start button.

If your device has a version of Android 5 or higher, you need to perform several manipulations with the smartphone itself before flashing it:

Download custom firmware

Installing custom firmware via Odin is not the best method. The safest option is custom firmware compiled for installation from recovery. The risks of getting a "brick" are much lower than with firmware via Odin. Do not expect miracles from "customs", they will not make your old device top-end. And in terms of stability and power consumption, the factory firmware will always be in the lead.

Installing custom firmware is no different from installing a single-file factory firmware:

We press the AP or PDA button in the program window, in the window that opens, select the *.img file.
In the options block, enable the Auto Reboot mode.
Press the Start button.
If the firmware is written successfully, the program will write PASS in the upper left corner of the window and the smartphone will automatically reboot.

My smartphone is a "brick"

If the firmware ended with errors, the program will report this by writing Fail on a red background. But often there are situations when the firmware was successful, the smartphone went into reboot and did not come out of it. Do not panic! All the worst has already happened. Remove the battery from the device and let it rest for 20-30 minutes. Then put the battery back in place. Using button combinations, try to enter recovery (Power + VolumeUp + Home) or emergency mode (Power + VolumeDown + Home).

It turned out to get into the recovery - excellent! We execute the command wipe data / factory reset and try to restart the smartphone. If it is possible to enter only emergency mode, we try to flash the device with a 5-file service firmware. If it doesn’t help either, the smartphone has a direct road to the service center. It is no longer possible to restore it by software methods.

Video: smartphone recovery after firmware

In this short article, we looked at the pros and cons of flashing with the Odin program, assessed the risks and learned what to do if the situation developed abnormally. Do not forget that the program is intended for service centers, not for smartphone users, and allows you not only to bring a malfunctioning device back to life, but also send a previously working smartphone or tablet to digital paradise with a couple of keystrokes.

Despite the high level of reliability of Android devices manufactured by Samsung, one of the leaders in the world market of smartphones and tablet computers, users are often puzzled by the possibility or need to flash the device. For Samsung Android devices, the best solution for software manipulation and recovery is the program.

It does not matter for what purpose the procedure for flashing a Samsung Android device is carried out. Having resorted to using the powerful and functional Odin software, it turns out that working with a smartphone or tablet is not so difficult as it might seem at first glance. We will deal step by step with the procedure for installing various types of firmware and their components.

Important! The Odin application, if the user does it incorrectly, can damage the device! All actions in the program the user performs at his own peril and risk. The site administration and the author of the article are not responsible for the possible negative consequences of following the instructions below!

Drivers will need to be installed to enable Odin to communicate with the device. Fortunately, Samsung has taken care of its users and the installation process usually does not cause any problems. The only inconvenience is the fact that the drivers are included with Samsung's proprietary software for servicing mobile devices - Kies (for older models) or Smart Switch (for new models). It should be noted that when flashing through Odin with Kies installed in the system at the same time, various failures and critical errors may occur. Therefore, after installing the drivers, Kies must be uninstalled.

Step 2: Put your device into download mode

The Odin program is able to interact with a Samsung device only if the latter is in a special Download mode.

Step 3: Firmware

Using the Odin program, it is possible to install single- and multi-file firmware (service), as well as individual software components.

Installing single-file firmware

Download the ODIN program and firmware. Unpack everything into a separate folder on drive C.

Necessarily! If installed, remove Samsung Kies! I'm on my way: "Control Panel" — "Programs and Features" — "Delete".

Run Odin as Administrator. The program does not require installation, so to run it, you need to right-click on the file Odin3.exe in the folder containing the application. Then select from the drop-down menu "Run as Administrator".

We charge the battery of the device by at least 60%, put it into the mode Download and connect to the USB port located on the back of the PC, i.e. directly to the motherboard. When connecting, Odin should determine the device, as evidenced by the filling in the blue color of the field ID:COM, displaying the port number in the same field, as well as the inscription Added!! in the log field (tab log).

To add a single-file firmware image to Odin, press the button "AP"(in versions Odyn up to 3.09 - the button PDA)

Specify the path to the file for the program.

After pressing the button "Open" in the Explorer window, Odin will start checking the MD5 amount of the proposed file. Upon completion of the hash sum check, the name of the image file is displayed in the field "AP (PDA)". Go to tab Options.

When using a single-file firmware in the tab Options All checkboxes must be cleared except for F. Reset Time" And "Auto Reboot".

Having defined the necessary parameters, press the button Start.

The process of writing information to the device memory sections will begin, accompanied by displaying the names of the device memory sections being written in the upper right corner of the window and filling in the progress bar located above the field ID:COM. Also in the process, the log field is filled with inscriptions about ongoing procedures.

Upon completion of the process, in the square in the upper left corner of the program, the inscription is displayed on a green background "PASS". This indicates the successful completion of the firmware. You can disconnect the device from the computer's USB port and start it by long pressing the power button. When installing a single-file firmware, user data, unless explicitly specified in the Odin settings, is not affected in most cases.

Installing a multi-file (service) firmware

When restoring a Samsung device after serious failures, installing modified software, and in some other cases, a so-called multi-file firmware will be required. In fact, this is a service solution, but the described method is widely used by ordinary users.

Multi-file firmware is called because it is a collection of several image files, and, in some cases, a PIT file.

Firmware with PIT file

The PIT file and its addition to ODIN are the tools used to repartition device memory. This method of carrying out the device recovery process can be used in conjunction with both single-file and multi-file firmware.

The use of a PIT file when flashing is permissible only in extreme cases, for example, if there are serious problems with the device's performance.

Installation of individual software components

In addition to installing the entire firmware, Odin makes it possible to write individual components of the software platform into the device - the kernel, modem, recovery, etc.

For example, consider installing custom recovery via ODIN.

It should be noted that the above methods of working with Odin are applicable to most Samsung devices. At the same time, they cannot claim to be absolutely universal instructions due to the presence of a wide variety of firmware, a large model range of devices, and small differences in the list of options used in specific applications.

The program is designed to flash devices based on Android. It is quite simple to flash a Samsung smartphone or tablet, but if you do not know a few elementary rules, the phone can be disabled. Below we will tell you how to reflash Samsung Odin correctly.

To use Odin does not require any special skills, the program can be used even by not very sophisticated users.
All currently available versions of Odin: , . The most stable version is v1.85.

Samsung Odin firmware rules

Main: Make sure that your Samsung is charged before flashing and in no case turns off during the flashing process. Do not disconnect the USB cable before the firmware is finished. It is advisable to use only the original and undamaged USB cable that you received with the device. The path on the computer to the firmware to be installed should not contain Russian letters (C:\samsung is correct, C:\New folder is not).

Samsung Firmware:
1. Download the official Samsung firmware for your model. Firmware can be found at:
samfirmware.com
sampro.pl
samsung-updates.com
live.samsung-updates.com
Firmware is divided into countries and regions: for example SER - Russia and the CIS, SEK - Ukraine and the CIS.

Albania:
ALB

Algeria:
ALG
ALR

Argentina:
ANC
ARO
CTI
UFN
PSN

Aruba:
ARU

Australia:
OPP
OPS
VAU
XSA
TEL
HUT

Austria:
AOM
DRE
MAX
MOB
MOK
ONE
TRG
ATO

Baltic:
SEB

Belarus:
MTB
VEL

Belgium:
BAE
BSE
PRO
XEB

Bosnia-Herzegovina:
BHO
BHT
TEB

Brazil:
BTA
Btm
TMR
ZTA
ZVV
ZTO
ZTM

Bulgaria:
CMF
GBL
MTE
MTL
OMX
PLX
VVT

Canada:
RGS
BMC
TLS

Chile:
CHB
CH
CHL
CHT
China:
CUH
INT
TEC
TIY
CMC
CHN
M00

Colombia:
COB
COL
COM
COO

Cyprus:
CYV

Egypt:
EGY

Finland:
ELS
SAU
NEE

France:
OFR
AUC
B.O.G.
COR
DIX
FTM
NRJ
ORC
ORF
SFR
UNI
VGF
XEF

Germany:
DBT
DTM
DUT
EPL
MAN
MBC
VD2
VIA
XEG

Greece:
AOC
COS
EUR
GER
TGR
VGR
CYO

Romania:
PAN
VDH
WST
TMO
XEH
TMH

India:
HFC
HYA
INA
IND
INU
IMS
REL
TAT
INS

Israel:
cel
PCL
PTR

Italy:
GOM
HUI
ITV
OMN
TIM
VOM
WIN
XET
FWB

Kazakhstan:
EST
KCL
KMB
KZK
SKZ

Korea:
SKT
Kor

Mongolia:
MPC

Nedirladny:
BEN
MMO
ONL
QIC
TFT
TNL
VDF
VDP
XEN
KPN

New Zealand:
VNZ
TNZ
NZC

Norway:
TEN
NEE

Pakistan:
WDC
PAK

Poland:
ERA
IDE
pls
PRT
XEO

Romania:
CNX
HAT
ORO
COA

Russia:
AZC
BLN
EMT
ERS
GEO
MTV
SER
SNT

Singapore:
BGD
XSO
XSP

Slovenia:
MOT
SIM

Slovakia:
GTL
IRD
TMS
ORS

South Africa:
XFA
XFC
XFM
XFV
XFE

Spain:
AMN
EUS
FOP
XEC
ATL

Sweden:
BAU
BCN
BME
BSG
BTH
COV
HTS
SEN
TET
TLA
XEE
VDS
TNO

Switzerland:
AUT
ORG
MOZ
SUN
SWC

Taiwan:
TWM
B.R.I.
TCC
TCI
CWT

Tanzania:
SOL

Tunisia:
ABS
RNG

Türkiye:
BAS
KVK
TUR
TLP
TRC

Ukraine:
KVR
SEK
UMC

South Africa:
MID
ARB
XSG
AFR
IT

Great Britain:
BTC
O2I
O2U
ORA
TMU
TSC
VOD
XEU
VIR
H3G
CPW

USA:
AWS
DOB
TMB
CLW

Uzbekistan:
USD

venisuela:
VMT

Vietnam:
XXV
PHU
XEV
DNA
FPT
SPT
TLC
VTC
VTL

2. Boot Samsung into bootloader mode.
Putting Samsung into bootloader mode
Before connecting the device to a computer and firmware, you need to boot Samsung in bootloader mode, for this:
For older Samsung models:

Turn off the smartphone / tablet and press the buttons at the same time Volume Down and On/Off. We are waiting for the inscription:

We release the buttons.

For new models from 2011-12.
Turn off the device and press the buttons at the same time Volume Down - Center + On / Off button.

Looking forward to the picture:

Release all buttons and press once Volume Up, should appear:

3. Connect your device to your computer with a USB cable. Drivers should be installed if they were not installed earlier.

4. Run Odin, if everything was done correctly before, then there will be a yellow window in the upper left corner, the device is recognized.

5. Specify Odin firmware file. If the firmware is in one file, then specify the path to it in the PDA window:

If multi-file then:
PIT file (if any) in the PIT field (click on the PIT button)
APBOOT_xxxxx.tar.md5 file in the Bootloader field (click on the Bootloader button)
File CODE_xxxxx.tar.md5 in the PDA field (click on the PDA button)
File MODEM_xxxxx.tar.md5 in the PHONE field (click on the Phone button)
File CSC_xxxxx.tar.md5 in the CSC field (click on the CSC button)

reset settings - wipe.

If when flashing Samsung Odin gives an error:

SetupConnection..
Can't open the serial(COM) port.
All threads completed. (succeed 0 / failed 1)

try another USB port or computer, repeat the whole process from the beginning.

If it pops out:

Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MD5 hash value is invalid
xxxxxxxxxxx.tar.md5 is invalid.
End...

it means the firmware file is broken, not fully downloaded. Download again, if it doesn't help, remove the md5 extension from the file and try again.

If you need to flash Samsung only partially, for example, you want to flash a modem, then paste the modem firmware file into the Phone. If you want to flash the kernel or then specify the file in the PDA field.

Remember that you act at your own peril and risk!